Every year, Milwaukee Tool organizes an invite-only media event, called NPS, in order to showcase dozens of new products that they plan to release over the next year. This year, the company had to pivot to an online event – and everyone is invited.
The online event, called Milwaukee Pipeline, is being split up into 4 different events over the next few months. The first one, showcasing M12, M18, and MX Fuel tools was held last night and we have all of the details.
Here are the highlights:
Multi-Tools and Accessories
Milwaukee didn’t just announce an updated oscillating multi-tool, they released 2 and a bunch of blades.
M12 Fuel Multi-Tool (2526-20)
Estimated release: September 2020
Milwaukee touts that this new M12 OMT provides the fastest 12-volt cut speeds, low vibration, and tool free blade change. The brushless motor is combined with an oscillation angle of 3.9 degrees and oscillations per minute between 10,000 and 20,000.
The M12 OMT will be available in both bare tool for $149 and kitted with an XC4.0 Battery, Charger, a Universal Fit OPEN-LOK Oscillating Multi-Tool Wood Blade, a Multi-Tool Sanding Pad, a 60 Grit Sand Paper, an 80 Grit Sand Paper, (2) 120 Grit Sand Paper, a 240 Grit Sand Paper, and Lunchbox Carrying Bag for $219.
courtesy of Milwaukee Tool
M18 Fuel Multi-Tool (2836-20)
Estimated release: November 2020
The M18 Fuel OMT will release a few months behind its M12 sibling, but also promises fastest cuts and lowest vibration. It does pack a little bit extra punch than the smaller version, with an oscillation angle of 4.2 degrees to go with the 10,000-20,000 OPM. The tool will also feature a 10-setting dial and an Auto-Load function, and a 180 degree LED light.
The M18 OMT will be available in both bare tool and kitted with an XC5.0 Battery, Charger, a Universal Fit OPEN-LOK Oscillating Multi-Tool Wood Blade, a Multi-Tool Sanding Pad, a 60 Grit Sand Paper, an 80 Grit Sand Paper, (2) 120 Grit Sand Paper, and a 240 Grit Sand Paper. Prices have not yet been released.
courtesy of Milwaukee Tool
OMT Blades
Estimated release: Available now
To pair with their new OMT’s, the red brand also recently released a large collection of OMT blades for various applications. There are a ton of them, so I won’t go into much detail, but here’s a rundown of their offerings:
-
Titanium Enhanced Extreme Materials Carbide Teeth Blades
-
Titanium Enhanced Extreme Metal Carbide Teeth Blade
-
Titanium Enhanced Bi-Metal Multi-Material Blades
-
Titanium Enhanced Bi-Metal Metal Blades
-
Japanese Tooth Hardwood Blades
-
Wood Blades
-
Specialty Blades
-
Sanding Pads
-
Scrapers
-
Sealant Cutting Blades
-
Boot Blades
-
5-in-1 Drywall Blade
-
M12 23GA Pin Nailer (2540-20)
Estimated release: Q1 2021
Many believed that this would finally be the year that Milwaukee releases a cordless pinner – and they were right…well, kind of. The brand did surprise us by releasing it on their 12-volt platform, since the other market competitors are all 18 volt, but it won’t actually be available until early next year. Oh well, at least we have something to look forward to.
Milwaukee says this pin nailer will have enough power to shoot ½” to 1-3/8” pins and to fire up to 750 pins per battery charge. It also looks extremely compact for a battery nailer. Like their other battery nailers, this too will employ a nitrogen air spring mechanism for speed, accuracy, and recovery time.
No word on price or kit options just yet.
courtesy of Milwaukee Tool
Impact Wrenches
Milwaukee took another deep dive on impact wrenches this year, after the past couple of years yielding positive results on the market. Their new announcements ranged from an ergonomic compact impact wrench to a beastly 1” d-handle high torque impact wrench. Let’s start with the big guns:
M18 Fuel 1” D-Handle Standard Anvil High Torque Impact Wrench w/ ONE-KEY (2868-20)
Estimated release: August 2020
This beat will be able to deliver 2,000 ft-lbs of nut-busting torque and 1,900 ft-lbs of fastening torque with its 24.4 pound frame (with battery). Though it’s big and powerful, Milwaukee says it can still install up to 200 1-1/4” bolts on a single 12ah battery charge.
The tool also features ONE-KEY to allow users to set a repeatable torque, in addition to customizing settings, tracking its location, and managing the tool through the use of Bluetooth technology.
The new 1” impact wrench will be sold both bare tool and kitted with two 12.0ah batteries, a charger, tool free adjustable handle, lanyard loop, and contractor bag. No pricing has been released yet.
courtesy of Milwaukee Tool
M18 Fuel 1” D-Handle Extended Anvil High Torque Impact Wrench w/ ONE-KEY (2869-20)
Estimated release: October 2020
The Extended Anvil impact wrench is very similar to the one mentioned above, but it will provide additional reach and also Lug Nut Mode, which will prevent over tightening of fasteners. When the tool senses that the lug nuts are within 350-450 ft-lbs of the optimal range, it automatically shuts the tool off.
This will also be sold both bare tool and kitted with two 12.0ah batteries, a charger, tool free adjustable handle, lanyard loop, and contractor bag. No pricing has been released yet.
courtesy of Milwaukee Tool
M18 Fuel Compact Impact Wrenches
Estimated release: November 2020
Available in both friction ring and pin detent varieties, these new compact impact wrenches measure only 4.8” in length, weighs 3.9 pounds with battery, and provides up to 250 ft-lbs of nut busting torque. It will also feature an AUTO SHUT-OFF mode, which will only apply a maximum of 20 ft-lbs of torque for hand-tightening fasteners.
The friction ring compact impact wrench will be available in both 3/8” and ½” and the pin detent will be available in ½”. All varieties will be available bare tool or kitted with two 5ah batteries, a charger, and contractor bag.
courtesy of Milwaukee Tool
M18 Fuel Mid-Torque Impact Wrenches
Estimated release: November 2020
These new mid-torque wrenches could provide the sweet spot for many contractors, combining both a reasonable size and weight, as well as packing a punch. The wrenches will features 650 ft-lbs of nut busting torque, while only weighing 5.1 pounds with a battery.
Like the compact impact wrenches, these will also feature an AUTO SHUT-OFF mode, but will apply no more than 35 ft-lbs before shutting off to allow for hand tightening. When reversed, that same mode will deliver full torque to loosen the bolt and then drop the RPMs once it senses the bolt has loosened to prevent fastener drops.
These will also be available in 3 different options: 3/8” friction ring, ½” friction ring, and ½” pin detent. All three will be available bare tool or kitted with two 5.0ah batteries, a charger, and contractor bag.
courtesy of Milwaukee Tool
Cordless Vacuums
Milwaukee has many different vacuum options, but with the ever increasing pressure to keep jobsites as clean as possible, I’m not complaining that they’re releasing 3 more.
M18 Fuel Compact Vacuum (0940-20)
Estimated release: October 2020
The M18 compact vacuum is the most versatile vacuum in this new batch. To provide options for all different cleaning applications, this vacuum comes with 5 different solutions, such as a powered floor tool, a floor tool, a brush tool, a utility tool, and a crevice tool with a flexible hose.
The vacuum also features a two-stage debris separation mechanism, to separate large and small debris. To extend the life of the battery, the tool features a high and low mode, which allow runtimes of up to 18 minutes and 28 minutes on a 5.0 battery pack, respectively.
This tool will only be available bare tool, with all of the attachments mentioned included.
courtesy of Milwaukee Tool
M12 Fuel 1.6 Gallon Wet/Dry Vacuum (0960-20)
Estimated release: October 2020
Milwaukee’s 12-volt lineup will also be seeing a new vacuum, with this compact 1.6 gallon wet/dry vacuum. When they first announced this, I was admittedly a bit skeptical, as vacuums are notoriously battery hogs, but Milwaukee says this model will last up to 14 minutes on high and 26 minutes on low with a 6.0 battery back – much longer than I would have expected.
This tool also features an air volume of 45 CFM and will be quieter than most other options at 87 decibels.
The M12 wet/dry vac will be offered in bare tool and kitted with a 6.0ah battery, charger, hose, HEPA filter, crevice tool, utility nozzle, and wall mount kit. Additional accessories like HEPA filters, wet filters, dust bags, brush tool, and power tool adapter will also be available separately.
courtesy of Milwaukee Tool
M18 Fuel PACKOUT Compatible 2.5 Gallon Wet/Dry Vacuum (0970-20)
Estimated release: October 2020
Perhaps my favorite announcement from the 1st episode of Milwaukee Pipeline was the PACKOUT compatible 2.5 wet/dry vacuum. The widely popular modular storage system, PACKOUT, continues to expand and the addition of a vacuum is welcomed. This vacuum will be the same size as the fairly recently released PACKOUT ammo box and PACKOUT cooler, which are both half the width of the full width cases and 3-times the height of the organizer boxes.
Like the M12 vacuum above, this PACKOUT version will only run at 87 decibels, as well, but will be able to run for up to 30 minutes on high and 50 minutes on low speed with an 8.0ah battery. A power tool dust adapter is also included with this tool. Much appreciated, Milwaukee.
This vacuum will also be sold bare tool, but will include the aforementioned power tool adapter, plus a flexible hose, HEPA filter, crevice tool, and utility nozzle. No pricing has been released.
courtesy of Milwaukee Tool
MX Fuel
While MX Fuel was mentioned, there were no new announcements, only updates to previously announced equipment. Both the 3600W/1800W Power Supply and the Tower Light are expected to be released in “early 2021.” The sewer drum machine with the stair climbing assist POWERTREDZ is available now.
For more information on MX Fuel, you can check out my full article on this new platform by clicking or tapping here.
source https://www.constructionjunkie.com/blog/2020/8/21/milwaukee-tool-announces-several-new-products-on-m12-m18-and-mx-fuel-platforms
No comments:
Post a Comment