Thursday, May 28, 2020

[VIDEO] This Robotic Suction Cup on Wheels Can Make Window Glazing Easy

The SMartLift SL1008 Outdoor Glazing Robot, via SmartLift

The SMartLift SL1008 Outdoor Glazing Robot, via SmartLift

Suction has been a lifting method of choice for window glaziers and other trades that work with smooth, flat objects for decades.  Many of those suction solutions are for manual lifting, but not SmartLift, a robotic glass lifting machine capable of lifting, hoisting, and tilting up to 2,200 pounds of glass.

SmartLift is a battery powered, remote control operated machine on wheels, equipped with several vacuum suction pads to safely lift and move window glazing from storage to its final install location. The company promises increased safety over more traditional methods and a reduced installation time, due to its fully rotational lifting mechanism and side shift capabilities allowing precise placement.

The company operated in Denmark for years prior to importing their machines to the United States in 2016.

Their system is currently offered in 6 different models depending on if you plan to lift indoor, outdoor, or if you’re using a telehandler to install your panels. Lifting capacities range from 837 pounds up to 2,200 pounds and can lift panels to heights from 96 inches up to 173 inches from the ground.  The telehandler attachment is limited by the machine it’s attached to.

You can check out the SmartLift SL1008 Outdoor glazing robot in action in the video below:

The onboard battery can power the machine for up to 30 hours on a single charge and SmartLift says it takes about 8 to 10 hours to fully recharge. Being battery powered, it’s also a suitable choice for indoor or enclosed space work.

As the labor force in the construction industry continues to get older, I’m noticing many lift-assist robotics becoming more popular throughout the country.  In addition to the SmartLift, a company called Construction Robotics has developed a weightless material lifting robot for masons, and there are several manufacturers making wearable exoskeletons for mechanical lift assistance for overhead work, material lifting, asphalt raking, and any other strenuous, repeatable task.

If these types of products can increase the quality of life for hardworking, seasoned tradespeople, many of whom retire with chronic muscle and joint pain, then this should be a welcomed addition to the fleet.




source https://www.constructionjunkie.com/blog/2020/5/28/video-this-robotic-suction-cup-on-wheels-can-make-window-glazing-easy

No comments:

Post a Comment